移動式登車橋的使用范疇及技術參數說明，如何選擇移動式登車橋？

 移動式登車橋使用原則：      

        移動式登車橋適用于現場無裝卸貨平臺或需要流動裝卸貨物的場所，是與叉車配合使用的貨物裝卸輔助設備，常用叉車為2.5t 、3t、5t等型號，移動式登車橋為一個移動的鋼結構斜坡，裝卸叉車可實現直接駛入卡車車廂內部進行批量裝卸作業，移動登車橋的斜坡角度為13度至17度，解決了貨車車廂與地面存在高度差叉車或人力無法直接裝卸問題。
移動登車橋產品特點：
     移動登車橋動力分為手動和電動液壓，電動泵站電壓通常為220；
     設備載荷從4噸到15噸，高度調節范圍為0.80-1.70米 或者1-1.8m
     移動式液壓登車橋實現貨物的安全快速裝卸，成倍提高裝卸作業效率，適用于拖車、半掛車、貨運站臺等物流環節；
     為出口企業裝在集裝箱提供方便，無可替代；
     隨時轉移到工作位置，簡單、便捷、省時、省力、大幅節省物流成本；

 MOBILE CONTAINER YARD RAMP
       When your needs would move a fork truck or vehicle up into or out of a building or other dock height structure, you need a stationary yard ramp
When you need to move into or out of a van, box or container you have the same decision elements plus the need for a level off zone at the top before your load enters or leaves the truck
      -Yard ramps help you handle freight faster off trailers!
      -Yard ramps help you handle freight faster off railcars!
      -Yard ramps help you handle freight faster off docks!
      -Wherever you need it, yard ramps move there easily!
      -Yard Ramps save you money everywhere you put it!
      -YARD RAMPS cost less than the alternatives!
      -YARD RAMPS delivers the best value!
      -Load capacity from 4 to 15 tons
      -Lifting height ranges from 0.8-1.70 meters
      -Powered by Hand pump or electric power pack，in case of power pack the power supply is usually 220V,single phase.

 濟陽東方液壓機械有限公司，移動液壓登車橋聯系電話：15169161768  0531-84210589